Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Installation instructions for part 99-9107B
2002-2008
KIT FEATURES
• DIN radio provision with pocket
• ISO DIN radio provision with pocket
• Double DIN radio provision
• Painted matte black to match factory
KIT COMPONENTS
• A) Radio housing • B) Pocket • C) Single DIN trimplate • D) Single DIN brackets • E) Double DIN trimplate
• F) Double DIN Brackets
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • XSVI-9004-NAV
Antenna Adapter: • 40-EU56 (with FAKRA plugs) • 40-VW54 (with ISO plugs)
TOOLS REQUIRED
• (2) 86-9001 Radio removal tools • Pry tool
METRA. The World's best kits.
®
Audi A4 / RS 4 / S4
(with a Symphony or NAV radio)
99-9107B
C
D
®
E
F
metraonline.com
U.S. PATENT # D639,796
Table of Contents
Dash Disassembly ......................................................2
Kit Assembly
– DIN radio provision with pocket .................................2
– ISO DIN radio provision with pocket ...........................3
– Double DIN radio provision ........................................3
CAUTION!
Metra recommends disconnecting the negative battery ter -
minal before beginning any installation, unless the vehicle manufacturer
recommends against so. Please check with your local Dealership for
more information. All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before reconnect -
ing the battery or cycling the ignition. Also, do not remove the factory
radio with the key in the on position, or the vehicle running. It would be
best to remove the key from the ignition and then wait a few seconds
before removing the factory radio.
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION

Publicidad

loading

Resumen de contenidos para Metra 99-9107B

  • Página 1 • A) Radio housing • B) Pocket • C) Single DIN trimplate • D) Single DIN brackets • E) Double DIN trimplate • F) Double DIN Brackets CAUTION! Metra recommends disconnecting the negative battery ter - minal before beginning any installation, unless the vehicle manufacturer recommends against so. Please check with your local Dealership for WIRING &...
  • Página 2: Dash Disassembly

    ® 99-9107B Dash Disassembly Kit Assembly 1. Insert Metra’s 86-9001 radio DIN radio provision with pocket removal tools into the slots in the 1. Remove the metal DIN sleeve from factory radio and pull the radio out. the aftermarket radio.
  • Página 3: Kit Assembly

    (Figure C) radio housing until secure. (Figure C) Locate the factory wiring harness 6. Locate the factory wiring harness in the dash. Metra recommends in the dash. Metra recommends using the proper mating adapter using the proper mating adapter...
  • Página 4: Important

    ® Installation instructions for part 99-9107B IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated.
  • Página 5: Características Del Kit

    ® Instrucciones de instalación para la pieza 99-9107B U.S. PATENT # D639,796 Indice Audi A4 / RS 4 / S4 2002-2008 Desmontaje Dash ............2 (con radio Symphony o NAV) 99-9107B Ensamble del kit – Provisión de radio DIN con cavidad ......2 CARACTERÍSTICAS DEL KIT...
  • Página 6: Ensamble Del Kit

    Ensamble del kit 1. Inserte herramientas de remoción Provisión de radio DIN con cavidad de radio 86-9001 de Metra en las 1. Quite la manga de metal DIN del ranuras del radio de fábrica y jale radio de mercado secundario.
  • Página 7 (Figura C) firme. (Figura C) Localice el arnés de cableado de 6. Localice el arnés de cableado de fábrica en el tablero. Metra recomienda fábrica en el tablero. Metra recomienda que use adaptadores adecuados de (Figura B) (Figura B) que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS.
  • Página 8: Importante

    ® Instrucciones de instalación para la pieza 99-9107B IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente...