Descargar
Compartir
Imprimir esta página
  1. Manuales
  2. Marcas
  3. Metra Manuales
  4. Accesorios de Automóviles
  5. 99-9700
  6. Instrucciones de instalación

Metra 99-9700 Instrucciones De Instalación

Ocultar thumbs Ver también para 99-9700:

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Descargar este manual
INSTALLATION INSTRUCTIONS FOR PART 99-9700
Harley-Davidson Street Glide, Electra Glide, Ultra and
Limited models 2014-Up / Road Glide 2015-Up
KIT FEATURES
• ISO DIN radio provision
• Included interface and LCD info screen
KIT COMPONENTS
• A) Radio housing • B) Radio brackets • C) LCD screen • D) LCD back plate • E) (6) #8 x 3/8" Phillips screws
• F) (4) #10-32 1/2" Phillips steel machine screws • Axxess interface (not shown)
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • Included interface
Antenna Adapter: • 40-EU10 - Handle bar controls: • ASWC-1/AXSWC
METRA. The World's best kits.
APPLICATIONS
99-9700
C
E
metraonline.com
™
Fairing Disassembly
– Harley Davidson Street Glide, Electra Glide,
Ultra, and Limited models 2014-Up ...................2-3
– Harley Davidson Road Glide 2015-Up ................... 4
Kit Assembly .......................................................... 5
Axxess interface installation ..............................6-7
Troubleshooting/Updating 99-9700 ...................... 8
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
D
• Torx screwdrivers • Allen wrenches
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
F
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
Table of Contents
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION

Publicidad

loading

Manuales relacionados para Metra 99-9700

Resumen de contenidos para Metra 99-9700

  • Página 1 INSTALLATION INSTRUCTIONS FOR PART 99-9700 APPLICATIONS Table of Contents Harley-Davidson Street Glide, Electra Glide, Ultra and Limited models 2014-Up / Road Glide 2015-Up Fairing Disassembly – Harley Davidson Street Glide, Electra Glide, 99-9700 Ultra, and Limited models 2014-Up ....2-3 – Harley Davidson Road Glide 2015-Up ....4 Kit Assembly ............
  • Página 2 99-9700 Harley Davidson Street Glide, Electra Glide, Ultra, and Limited models 2014-Up Disassembly 1. Remove (4) T-27 from inner fairing. (Figure A) 2. Remove (3) T-27 from windshield (caution not to drop the outer fairing or windshield). (Figure B) 3. Remove outer fairing, unplugging the headlight.
  • Página 3 5.4 (1) T-25 Torx screw shared with the storage pocket. 6. Remove the radio bracket. (Figure E) Note: This bracket will be reused with the 99-9700 kit. (Figure E) 7. Remove the gauge cluster. (Figure E) 8. Remove (4) 3/16 Allen screws from the sides of radio.
  • Página 4 (Figure D) fairing bracket attached to the radio. Note: This bracket will be reused 5. Unplug the turn signals. with the 99-9700 kit. Please note the orientation of the bracket. The curved 6. Remove the speaker grills with a (Figure B) portion faces the rear of the bike.

  • Página 5: Kit Assembly

    99-9700 Kit Assembly 1. Secure the radio brackets to the (b) For the Road Glide radio housing with (4) #8 x 3/8” 2015-Up; Attach the fairing Phillips screws supplied. (Figure A) bracket removed in step 10 of disassembly to the top of 2.

  • Página 6: Axxess Interface Installation

    Axxess Interface Installation Connections to be made FEATURES From the 99-9700 harness to the aftermarket radio: • Provides accessory power (12-volt 10-amp) • Connect the Black wire to the ground wire. • Connect the Yellow wire to the battery wire.

  • Página 7: Installing The Interface

    99-9700 Installing the Interface Final Assembly With the key in the off position: 1. Reassemble the fairing in reverse order of disassembly. 1. Connect the 99-9700 harness into the Axxess interface, and then to the wiring harness in the vehicle. 2. Connect the LCD screen into the Axxess interface. LCD Operation Attention! To prevent error codes, all electronic devices including the headlight and turn signals must be connected before proceeding to the next step. * The included LCD screen provides oil pressure and EITMS status. For more information, please Initializing the Interface see the owner’s manual that came with the bike. Attention! If the interface loses power for any reason, the following steps will need to be performed again.
  • Página 8 Updating the 99-9700 Metra/Axxess Tech Support. • Download and install the WebXXpress software update from axxessinterfaces.com. Please follow the instructions on the website exactly as stated. • Connect the USB-MINI-CAB update cable (sold separately) between the 99-9700 and the computer. ® NOWLEDGE IS OWER •...

  • Página 9: Características Del Kit

    Instrucciones de instalación para la pieza 99-9700 APLICACIONES Harley-Davidson Street Glide, Electra Glide, Ultra y Indice Limited 2014 y Masr recientes / Road Glide 2015 y Desmontaje Carenado Mas recientes 99-9700 – Harley Davidson Street Glide, Electra Glide, Ultra, Modelos Limited 2014 y Mas recientes ..2-3 –...
  • Página 10 99-9700 Harley Davidson Street Glide, Electra Glide, Ultra, modelos limited 2014 y Mas recientes desensamble 1. Quite los (4) T-27 del carenado interior. (Figura A) 2. Quite los (3) T-27 del parabrisas (tenga cuidado de no dejar caer el carenado exterior o el parabrisas).
  • Página 11 Quite el soporte del radio. (Figura E) (Figura E) Nota: Este soporte se volverá a utilizar con el kit 99-9700. Deslice el radio hacia la parte Quite el conjunto de indicadores. trasera de la motocicleta para (Figura E) sacarlo y desconecte el radio.

  • Página 12: Harley Road Glide 2015 Y Mas Desensamble

    (Figura D) Nota: Este soporte se volverá a utilizar con el kit 99-9700. Tenga en 5. Desconecte las señales direccionales . (Figura B) cuenta la orientación del soporte. La 6.
  • Página 13 99-9700 Kit Assembly 1. Sujete los soportes del radio 6. (a) Para los modelos Street Glide, Electra Glide, Ultra y Limited 2014 y más a la carcasa del radio con los recientes; coloque el soporte del radio (4) tornillos Phillips #8 de 3/8”...

  • Página 14: Instalación De La Interfase Axxess

    Instalación de la interfase Axxess Conexiones que se deben hacer CARACTERÍSTICAS Desde el arnés 99-9700 al radio de mercado secundario: • Provee corriente de accesorios (12 voltios 10 amperes) • Conecte el cable Negro con el cable de tierra. • Entrada de bocina de alto nivel •...

  • Página 15: Instalación De La Interfase

    Instalación de la interfase Montaje final With the key in the off position: 1. Reassemble the fairing in reverse order of disassembly. 1. Connect the 99-9700 harness into the Axxess interface, and then to the wiring harness in the vehicle. Operación de la pantalla LCD 2. Connect the LCD screen into the Axxess interface. Attention! To prevent error codes, all electronic devices including the headlight and turn signals must be connected * La pantalla LCD incluida proporciona el estado de la presión de aceite y before proceeding to the next step.

  • Página 16: Resolución De Problemas

    Instrucciones de instalación para la pieza 99-9700 Resolución de problemas Si tiene dificultades con la instalación de este producto, comuníquese con nuestra línea de soporte Si la información del aceite/EITMS no aparece en el kit, realice este paso: técnico, ya sea por teléfono al 386-257-1187, o envíe •...