Double Din Head Radio Provision - Metra 95-7863 Instrucciones De Instalación

Double DIN head radio provision

1. Attach the Double DIN brackets to the
Double DIN trim plate. (Figure A)
2 Slide the Double DIN head unit into the
bracket/radio housing assembly and
secure the Double DIN head unit to the
assembly using the screws supplied
with the radio. (Figure B)
3. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
Note: Models equipped with factory
DDIN radio will require supplied O.E.
Replacement panel. (Figure C)
4. Reassemble dash in reverse order
of disassembly.
Kit Assembly 95-7863
4
(Figure A)
(Figure B)
(Figure C)