Kenmore 385.15202 Manual De Instrucciones página 32

Bobbin winding (continued)
[] Push the bobbin to the right.
[_With the free end of the thread held in your hand,
depress the foot control. Stop the machine when the
bobbin has made a few turns, and cut the thread close
to the hole in the bobbin.
[]
[] Depress the foot control again. When the bobbin s fully
wound, it stops automatically. Return the bobbin winder
to its original position by moving the spindle to the left.
and cut the thread.
[] Push in the handwheel to engage the clutch
* The machine does not function until the clutch is
engaged.
NOTE:
The position of the bobbin winder stopper is adjustable
depending on required amount of thread on bobbin
(i.e. 1/2 full or full). Use a screwdriver and loosen the
screw one turn or less. Do not take the screw all the way
out. Adjust the position of the bobbin winder stopper.
Retighten the screw.
[]
r
[]
f
20