Twin Needle Stitches - Kenmore 385.15202 Manual De Instrucciones

Twin Needle Stitches (Option)
(_) Stitch selector:
(_) Presser foot:
@ Needle thread tension:
@ Stitch length:
@ Stitch width:
@ Needle:
3, *8 or *9
Zigzag foot
1 to4
0.5 to 1
1 to 2.5
Twin needle (optional item)
*Stitches 8 and 9 are only available for model 15408.
NOTE: Do not set the stitch width at more than 2.5,
otherwise the needle may hit the needle plate or presser
foot and could possibly break.
(_Upper thread guide
@Check spring .molder
@Thread take-up lever
@Needle bar thread guide
@Twin needle _optional i_em,
Turn off the power switch. Pull up the additional spool pin.
Place a piece of felt on the additional s 3ool pin. Make sure
you separate the two threads by placing one thread in each
needle bar thread guide@.
Change the needle to a twin needle _ . Thread each needle
from front to back.
When you want to shift the fabric to change the sewing
direction, you must first raise the needle out of the fabric.
®
® ®
½
®
\
52