Aim TTi TGF3162 Guia De Inicio Rapido página 117

Ramp
Frequency Range:
Frequency Resolution:
Output Level:
Linearity Error:
Variable Symmetry:
Pulse
Frequency Range:
Frequency Resolution:
Output Level:
Aberrations (Typical):
Jitter RMS:
Rise and Fall Times:
Width:
Duty:
Arbitrary
In built arbitrary waveforms (Sin(x)/x, Exponential Rise, Exponential Fall, Logarithmic Rise,
Logarithmic Fall, Haversine, Cardiac, Gaussian, Lorentz and D-Lorentz). Up to 4 user-defined
waveforms may be stored in non-volatile memory. Waveforms can be defined by downloading of
waveform data via remote interfaces or from the instrument's front panel.
Waveform Memory Size:
Vertical Resolution:
Frequency Range:
Frequency Resolution:
Output Level:
Sampling rate:
Point to Point Jitter
(Typical):
Rise and Fall Times:
Effective Analogue
Bandwidth (-3dB):
116
1µHz to 5MHz
1µHz, 13 digits
10mVp-p to 10Vp−p into 50Ω
<0.1% to 200kHz [<0.1% to 100kHz]
0.00 % to 100.00 %, 0.01% resolution
1mHz to 20MHz
1mHz, 11 digits
10mVp-p to 10Vp−p into 50Ω
±3% of amplitude [±5% of amplitude]
<30ps (cycle to cycle)
Rise and Fall times can only be varied together simultaneously
10ns to 1ms (10% to 90%)
Range:
100ps
Resolution:
±500ps ±0.01% of period
Accuracy:
Range: 25ns to 999.999999975s
Resolution: 100ps
Accuracy: ±200ps ±0.01% of period
0.001% to 99.999%, 0.01% resolution
8192 points
16 bits [14 bits]
In built arbitrary waveforms
User defined arbitrary waveforms
In built arbitrary waveforms
User defined arbitrary waveforms
≤ 50MHz
≤ 80MHz
800MSa/s [400Msa/s]
1.25ns [2.5ns]
<5ns for 100MHz filter
<8ns for 62.5MHz filter
62.5MHz, 100MHz, User Selectable [62.5MHz fixed]
1µHz to 4MHz [1µHz to 2MHz]
1µHz to 80MHz [1µHz to 40MHz]
1µHz, 13 digits
1µHz, 14 digits
10mVp-p to 10Vp−p into 50Ω
10mVp-p to 5Vp-p into 50Ω
[<8ns]