Coupling The Frequency Of Both Channels - Aim TTi TGF3162 Guia De Inicio Rapido

6.9

Coupling the Frequency of Both Channels

Start with the instrument returned to Default Settings.
MENU
Utility
Parameter
Frequencies
Parameter
Output State
Output State
Parameter
Phase Shift
MENU
Sine
Parameter
Frequency
Note that, when channel 1 is set to 1MHz, channel 2 is also set to 1MHz.
The 90 degree phase shift between the channels can be seen.
24
HARD KEY NAME
Utility
Soft-key Name
Dual Ch >Freq > On/Off
HARD KEY NAME
Output1
Output2
Soft-key Name
Output > Phase
HARD KEY NAME
Sine
Soft-key Name
Freq
Setting
Coupled
Setting
On
On
Setting
90 degrees
Setting
1MHz