Aim TTi TGF3162 Guia De Inicio Rapido página 15

•
Enter a phase of -45 degree.
The set phase angle is the point in the waveform period which is coincident with the Sync or trigger edge,
i.e. it is the point in the period at which the waveform starts. Hence a negative phase setting advances, and
a positive phase setting delays the waveform relative to the Sync or trigger; the waveform in the graph box
changes to show this.
The Align soft-key is used to re-align phase when making frequency changes.
Change the Output Polarity
•
Press the soft-key labelled Type to invert the output polarity.
Note that successive presses of the type key alternates between normal and inverted.
Change the Load Impedance
•
Press the soft-key labelled Load
14