GreenWorks ELITE ST-140-T El Manual Del Propietario página 16

OPERATION
INSTALLING THE BATTERY PACK (See Figure 7.)
• Place the battery pack in the trimmer. Align raised ribs (3) on battery pack with grooves in the
trimmer's battery port.
• Make sure the latch on the back of the battery pack clicks into place and that battery pack is
fully seated and secure in the trimmer before beginning operation.
REMOVING THE BATTERY PACK (See Figure 7.)
• Release the switch trigger and lock-out trigger to stop the trimmer.
• Press and hold the battery latch button (1) on the back of the battery pack.
• While holding the battery latch place one hand the the trimmer handle (2) and remove battery
pack.
STARTING AND STOPPING THE TRIMMER (See Figure 8.)
• Ensure a fully charged battery is installed into the string trimmer.
• To start the string trimmer, press and hold the lock-out button (1) and squeeze the switch trigger (2).
• To stop the string trimmer, release switch trigger to stop.
1 1
2
2 2
16
1
Fig.7
Fig.8