Installation; Mounting The Pdu - Tripp-Lite PDUMVR20NET Manual Del Propietário

Installation

Mounting the PDU

Note: The illustrations may differ somewhat from your PDU model. Regardless of configuration, the user must
determine the fitness of hardware and procedures before mounting. The PDU and included hardware are designed
for common rack and rack enclosure types and may not be appropriate for all applications. Exact mounting
configurations may vary. Screws for attaching the mounting brackets and cord retention shelf to the PDU are
included. Use only the screws supplied by the manufacturer, or their exact equivalent.
If installing the PDU in a rack that has button-mount slots, you only need to perform steps for
toolless mounting (step
Toolless Mounting
1-1
Attach the included mounting buttons
to the PDU. Position the PDU as desired
in the rack enclosure, align the buttons
with the rack mounting slots, and slide
the PDU into position.
Note: To install the PDU with its outlets
facing the rear of the rack, use the included
PDUMVROTATEBRKT accessory. This V-shaped
bracket provides a mounting button on one leg
of the V and a button-mount slot on the other,
effectively repositioning the mounting buttons.
See Features section for image.
Regular Mounting
1-2
Attach the mounting brackets to the
PDU.
1-3
(Optional) Attach the cord retention
bracket(s) to the PDU.
1-4
Attach the PDU to a vertical rail in your
rack or rack enclosure. Use the included
mounting hardware to attach the
mounting brackets to the rail.
16-10-211-933668.indb 3
). If your rack does not have button-mount slots, proceed to step
1-1
3
1-1
1-2 1-3
PDUMVR30HVNET Shown
.
1-2
1-4
12/22/2016 11:36:12 AM