Tripp-Lite PDUMVR20NET Manual Del Propietário página 9

Features
Circuit Breaker (Select Models): Each bank has its own breaker
labeled Bank 1 and Bank 2. If the connected equipment load exceeds
the Maximum Load Rating for that bank of the PDU, the circuit breaker
will trip.
Circuit Breaker (Select Models): If the connected equipment load
exceeds the Maximum Load Rating of the PDU, the circuit breaker will
trip. Disconnect excess equipment and allow the breaker to cool before
depressing the plunger to reset the breaker.
Cord Retention Bracket: Provides secure attachment points for
connected equipment cords.
Mounting Buttons: Come pre-installed on the back side of the PDU and
are used for toolless mounting.
Note: Four additional mounting buttons are included for alternate rack styles.
PDUMVROTATEBRKT Mounting Accessory: Use these V-shaped
brackets to mount the PDU with its outlets facing the rear of the rack.
Ground Screw: Use this to connect any equipment that requires a
chassis ground.
Mounting Brackets: Use these brackets to mount the PDU.
9
16-10-211-933668.indb 9 12/22/2016 11:36:20 AM