Bornay WIND+ Manual De Instrucciones página 59

7. The cable that exists from the wind turbine due to the distance is of
greater section than the one admitted by the connectors MC4. How
do I connect the cables to the regulator input MC4?
A connection or connection downstream of the connector can be
made by reducing the section to the maximum permissible by it, since
the MC4 connector is calculated for the maximum intensity that the
interface supports, and a larger section only makes sense for
possible losses Over long distances.
8. What wire section should I use to install the unit correctly?
See the part on Sections and Wiring in the Annexes.
59