Use And Maintenance; General Notes - Jacuzzi START! 70 Manual De Instalación, Uso Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

USE & MAINTENANCE
(models with multi-function panel)
Functions
Cascade dispenser (pos. A) built into the upper part of
the multi-purpose panel, it creates a sail-shaped jet.
Large shower head (pos. B) fastened to the centre of the
upper crosspiece, it creates an ample rainfall jet.
Showerhead (pos. C) with ergonomic shape, hooked on-
to the multi-purpose shelf for easy access.
Use of functions

GENERAL NOTES:

Never use water at a temperature of over 60 °C, to
prevent damage to the plumbing circuit.
NOTE: It is also possible to use two functions at the same
time. Just position the diverter dial half way be-
tween the two functions.
THERMOSTATIC TAP FIXTURES
A
Before you use any function, you should adjust the water
temperature to the value you want by doing the following:
I
Turn the dial (M) so that the notch matches up with the cho-
sen value. The knob is provided with a safety lock that fixes
the temperature at 38°C; to select higher temperatures, push
the button (P).
I
If you wish to try the water temperature, turn the diverter
C
B
R
38°
dial (G) to the "showerhead" (C) position and turn the stop
tap (R) to let water come out.
I
Once the required water temperature has been reached,
turn the dial (G) to the position that indicates the function y-
ou want to use.
Remember to turn off the stop tap every time after u-
se (R). If temperatures above 38 °C have been se-
lected, it is advisable to turn back the thermostatic
mixer dial to the position before the safety lock.
TAP FIXTURE WITH SINGLE CONTROL
A
Before you use any function, you should adjust the water
temperature to the value you want by doing the following:
I
Turn the ring nut (G) of the deviator to the "shower head"
position (C).
G
I
Raise the lever of the mixer (M) and turn it to the right or
left until the desired temperature is reached.
M
I
Once the required water temperature has been reached,
turn the dial (G) to the position that indicates the function y-
P
ou want to use.
16
C
B
G
M

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Start! 80Start! 90Start! 90 round

Tabla de contenido