Solar Charge IT! 4502 Manual Del Usario página 5

Cargador de batería
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

D
1. Locate the charger as far away from the battery as DC cables permit.
2. Never place the charger directly above the battery being charged; gases from the
battery will corrode and damage the charger.
3. Never allow battery acid to drip on the charger when reading specific gravity or filling
the battery.
4. Do not operate the charger in a closed area or restrict ventilation in any way.
5. Do not set a battery on top of the charger.
6. Locate the charger at least 18" above the floor.
7. Do not place the charger where rain, snow, or other moisture could drip on it.
BATTERY CHARGER CONNECTION PRECAUTIONS
E
1. CAUTION: Connect and disconnect DC output clips only after setting any switches
with an OFF position to OFF and removing AC power cord from electric outlet. Never
allow clips to touch each other.
2. When hooking up charger, attach one clip to battery and the other to a point away
from battery (see sections G & H). Do not hook up charger until reading sections A–J.
3. Always make battery connections prior to plugging charger into AC outlet.
To reduce explosion risk, never connect both clips directly to the battery. When making
each connection, twist or rock clip back and forth several times to make a good connection
and to reduce the risk of a clip slipping off and creating a spark. Do not twist or rock clip on
the battery after the second clip connection is made.
LOCATING THE CHARGER

Publicidad

Tabla de contenido
loading

Productos relacionados para Solar Charge IT! 4502

Este manual también es adecuado para:

Charge it! 4501

Tabla de contenido