Solar Charge IT! 4502 Manual Del Usario página 8

4. When the battery reaches full charge and enters Maintenance Mode, the green
CHARGE COMPLETE indicator will light. The battery can now be put back into service
or can remain indefinitely on the charger without risk of overcharging. The charger will
maintain the battery at full charge until it is needed for service.
5. When you are finished with the charging process, disconnect AC power cord from AC
outlet, and then disconnect DC leads from battery/vehicle in the reverse sequence of the
connection procedure.
Voltage Selector Switch
POWER Indicator LED
CHARGE COMPLETE Indicator LED
I
CAUTION – Make sure charger is unplugged from electrical outlet before performing any
maintenance.
A minimum amount of care can keep your battery charger working and looking good for
years.
1. Clean the clamps after each use. Wipe off any battery fluid that may have come in
contact with the clamps to prevent corrosion. Battery fluid may be neutralized with a
solution of water and baking soda.
2. If needed, the case may be wiped clean with a soft cloth.
There are no user-serviceable parts inside.
For information concerning use, applications, or service, call Technical Service at
800.328.2921.
CHARGING LED
ERROR LED
CHARGER CARE & MAINTENANCE