Routine Control And Maintenance Operations And Safety Checks; Safety Information - RCM ATOM PLUS /1 Serie Manual De Uso Y Mantenimiento

1) The machine must be inspected by a specialist technician who checks its safety or for any damage or defects in the following cases:
● before it is put into operation
● after modifi cations or repairs
● at regular intervals, as indicated in the «Routine maintenance and checks" table.
2) Every six months check that the safety devices are in good working conditions; the inspection must be made by authorized specialist
staff.
To ensure that the safety devices are properly operating , the machine must be overhauled by specialist staff or skilled workshop
every 5 years.
3) The person in responsable of the machine must make an annual check of its condition. During this checking, he must decide
whether the machine still complies with the technical safety regulations. After checking it has to apply on the machine a label of
checking made.
1 check the battery electrolyte level
2 check coal brushes of drive and brush motor
3 check that the main brush is not entangled with string,wire,...
4 check the dust fi lter
5 replace the dust fi lter
6 check traces of side and main brush
7 check belt tension
8 check the engine oil level
9 check the engine air fi lter
10 clean the engine air fi lter
11 replace the engine oil
12 check the hydraulic oil level
13 replace the hydraulic oil (with "Agip Rotra ATF" type)
E electric machine
B petrol machine
1) Cleaning:
When cleaning and washing the machine, take care when using aggressive detergents, acids, etc.
Follow the instructions provided by the detergent producer, and wear protective clothing if appropriate (e.g. overalls, gloves, goggles, etc.
- see EEC directives on this subject).
2) Explosive atmosphere:
The machine is not constructed to work in environments where there is a risk that there might be explosive gases, dusts or vapours, and so
its use in an explosive atmosphere is FORBIDDEN.
3) Disposal of harmful substances:
Comply with the laws in force on waste disposal and treatment when disposing of the material collected, the machine fi lters and spend
material such as batteries, motor oil, etc.
ROUTINE CONTROL AND MAINTENANCE
OPERATIONS AND SAFETY CHECKS
Periodic maintenance and checks

SAFETY INFORMATION

ATOM PLUS / 1
every hours...
8 40 100 150
E B
E
E+B
E+B
E+B
E+B
B
B
B
B
B
500 1500
E+B
B
104