Binks AA1600M Manual De Servicio página 12

EN
When ordering, please specify Part No. (Not all Part Nos. are available for purchasing.)
ITEM PART
NO. NO. DESCRIPTION
1 — GUN BODY ....................................................... 1
2 SPA-71-K5 BAFFLE PLATE (KIT OF 5) ................................ 1
FLAT TIP COMPONENTS
3 54-5811-K ✙ FLUID SEAT (1600PSI) ...................................... 1
(UHMW STANDARD,
OPTIONAL TUNGSTEN CARBIDE 54-5799-K)
4 SPA-98-K5 GASKET (KIT OF 5) .......................................... 1
5 114-XXXXX ■ FLAT TIP (FINE FINISH TIPS 9-XXXX-F) ............ 1
6 54-5795-K ▼ FLAT TIP HVLP AIRCAP KIT ............................. 1
(FLAT TIP LVMP AIRCAP 54-5797-K)
7 54-5852 RETAINING RING .............................................. 1
8 54-5794 m FLAT TIP GUARD .............................................. 1
TWIST TIP COMPONENTS
3A 54-5833-K ✙ TWIST TIP FLUID SEAT (1600PSI) ..................... 1
(UHMW STANDARD,
OPTIONAL TUNGSTEN CARBIDE 54-5832-K)
5A 9-XXX-75 ■ TWIST TIP ......................................................... 1
5B 54-7539-K2 TWIST TIP BRACE (KIT OF 2) ........................... 1
5B2 54-5801-K2 ALTERNATE TWIST TIP BRACE (KIT OF 2) ......... 1
(FOR 54-5796-K AND 54-5798-K AIR CAPS FOR SPRAY GUNS
PRIOR TO DATE 1/20/2013)
6A 54-5924-K ▼ TWIST TIP HVLP AIRCAP KIT ........................... 1
(TWIST TIP LVMP AIRCAP 54-5925-K)
7A 54-5928 RETAINING RING .............................................. 1
8A 54-5921 m TWIST TIP GUARD ........................................... 1
9A 54-5930 m TWIST TIP GUARD SCREW............................... 1
▼ All aircap kits are pre-assembled with Retaining ring and
appropriate tip guard. When switching from flat tip to twist
tip, or vice versa, be sure to order correct fluid seat (3/3A).
For twist tip, item 5B will also be needed.
■ Refer to page 10 for available tip sizes. When purchasing
twist tip, discard packaged brace/seal and use Item 5B only.
✙ Pre-assembled with gasket SPA-98.
HOSES
71-4990 15' Polyurethane Air Tubing ASM w/fittings,
3/8" O.D., 1/4" I.D.
71-4991 25' Polyurethane Air Tubing ASM w/fittings,
3/8" O.D., 1/4" I.D.
71-4992 15' 1/8" High Pressure Fluid Hose Assembly
71-4993 25' 1/8" High Pressure Fluid Hose Assembly
71-4995 25' 3/16" Low Pressure (1900PSI Max) Fluid Hose
Assembly
FITTINGS
54-4976-K3 3-Pack 1/4" NPT(f) x 3/8" O.D. Push-In Tube Fitting
(optional)
71-28 D.M. Nipple (1/8"NPT x NPS) w/o filter applications
72-2332 Fluid Inlet Swivel (1/4"M x 1/4"F)
54-5897 JIC (1/2) Fluid Fitting for 54-5892 Fluid Tube Assy.
FLUID FILTER
54-1835 100 Mesh (Edge Filter)
54-1836 60 Mesh (Edge Filter)
54-5891-K5 Fluid Tube Retainer
54-5896-K5 Optional Tube Retainer
www.carlisleft.com
AA1600M AIR-ASSIST AIRLESS SPRAY GUN
PARTS LIST
Refer to page 12 when referencing Item Nos.
QTY.
ACCESSORIES
12 / 14
ITEM PART
NO. NO. DESCRIPTION
9 SN-402-K AIR VALVE ASSEMBLY ..................................... 1
10 — ▲ TRIGGER ........................................................... 1
11 54-5892 FLUID TUBE ASSEMBLY ................................... 1
11A 54-5780 FLUID TUBE ASSEMBLY ................................... 1
12 54-1835 FLUID FILTER 100 MESH .................................. 1
13 — j FLUID INLET SWIVEL (1/4" NPS) ...................... 1
14 — j FILTER ADAPTER NUT ...................................... 1
15 SN-9-K3 AIR INLET FITTING 1/4" NPS (KIT OF 3) .......... 1
16 — ● FILTER BRACKET SCREW ................................. 1
17 — ● FILTER BRACKET .............................................. 1
18 54-5825 STANDARD FLUID NEEDLE ASSEMBLY KIT
(1600PSI) .......................................................... 1
54-5887 OPTIONAL ACID CATALYZED FLUID NEEDLE
ASSEMBLY KIT (1600PSI) ................................. 1
19 54-5850 BLANKING NEEDLE NUT ................................. 1
22 54-5815 SPREADER VALVE ASSEMBLY.......................... 1
23 — # BODY BUSHING ............................................... 1
24 — # BODY BUSHING GASKET ................................. 1
25 — ▲ TRIGGER NUT ................................................... 1
26 — ▲ TRIGGER SCREW .............................................. 1
▲ Available as part of kit 54-5835.
● Available as part of kit 54-5827.
# Available as part of kit 54-5829.
m Mandatory for operating pressures above 1000 psi.
j Available as part of kit 54-4726-K. Order Filter (12) separately.
FLUID REGULATOR
845001 Med Pressure Reg. w/Gauge, 6Gpm, 100 to 800 PSI reg
range
845010 Med Pressure Reg. w/Gauge, 3Gpm, 400 to 1250 PSI reg
range
CLEANING KIT
54-4994 Cleaning Kit: Includes one standard stiff nylon pipe
cleaning brush, full-size nylon brush, tip cleaner and
Binks Gunners Mate lubricant.
HVLP AIRCAP TEST KITS
54-5836-K Flat Tip HVLP Aircap Test Kit (Incl Gauge)
54-5932-K Twist Tip HVLP Aircap Test Kit (Incl Gauge)
TEST GAUGES
54-5327 HVLP Test Gauge
GUN LUBE
6-429 Binks Gunners Mate gun lube, 2 oz. bottle (20/box)
QTY.
77-2921-R10.5 (6/2017)