Installation And Connection - Bartscher 125.506 Manual Del Usuario

5.2 Installation and connection

CAUTION!
Installation and maintenance of the device may be carried out only by qualified
personnel!
Assembly of the salad bar
NOTE!
Two people are needed for the assembly of the salad bar!
•
Unpack the device and remove all wrapping material.
•
Remove the protective film from the device. Check that all the film has been
removed.
•
Mount the glass cover with integrated lighting on the device (fig. 2).
a
•
Insert the support poles
for in the device's housing
•
Place the glass cover
enter into place in the designated holes on the surface of the support poles.
•
Then attach the glass cover to each support pole
•
Be careful when guiding the cable to the lighting glass cover
•
Connect the light power cord to the appropriate plug.
- 30 -
⑨
⑧
⑨
for mounting the glass cover
⑧
.
①
on the support poles
①
①
in the openings provided
⑨
so that the assembled pins would
⑨
using the 3 supplied nuts (a).
①
.
fig. 2