Lp Gas Cylinder (Tank) Specifications And Installation - Brinkmann 810-2512-S Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Grill is hot when in use. To avoid burns:
DO NOT attempt to move the grill.
Block the wheels so the unit does not accidentally move.
Wear protective gloves or oven mitts.
DO NOT touch any hot grill surfaces.
DO NOT wear loose clothing or allow hair to come in contact with grill.
Not for commercial use. DO NOT use this grill for anything other than its intended purpose.
USE CAUTION AND COMMON SENSE WHEN OPERATING YOUR GAS GRILL.
FAILURE TO ADHERE TO THE SAFETY WARNINGS AND GUIDELINES IN THIS
MANUAL COULD RESULT IN SEVERE BODILY INJURY OR PROPERTY DAMAGE.

LP GAS CYLINDER (TANK) SPECIFICATIONS AND INSTALLATION:

ONLY connect this grill to a Type 1 cylinder valve. The Type 1 valve can be identified with the
large external threads on the valve outlet.
DO NOT connect to a propane cylinder exceeding a 20 lb. (9.1 kg) capacity.
DO NOT connect to a cylinder that uses any other type of valve connection device.
Inspect the propane tank valve rubber seal for cracks, wear or deterioration prior to use. A
damaged rubber seal can cause a gas leak, possibly resulting in an explosion, fire or severe
bodily harm.
Turn off the cylinder valve when your grill is not in use.
Handle the tank with care.
Always secure the cylinder in an upright position.
Never connect an unregulated LP gas cylinder to your grill.
DO NOT expose LP gas cylinders to excessive heat or ignition sources.
DO NOT store a spare LP gas cylinder under or near your grill.
Allow only qualified LP gas dealers to fill or repair your LP gas cylinder.
DO NOT allow the cylinder to be filled beyond 80% capacity.
Read and follow all warnings and instructions that are on the cylinder and that accompany this
product.
DO NOT store a spare LP gas cylinder (full or empty) under or near your grill. This could cause
excess pressure to be expelled through the vapor relief valve resulting in fire, explosion, or
severe personal injury, including death.
Propane gas is heavier than air and will collect in low areas. Proper ventilation is extremely
important. Keep the ventilation opening(s) of the LP gas cylinder enclosure free and clear from
obstructions and debris.
DO NOT insert any foreign objects into the cylinder valve outlet as this could damage the
rubber seal. Do not use propane tank with a damaged rubber seal. A damaged rubber seal can
cause a gas leak, possibly resulting in explosion, fire, severe bodily harm, or death. Inspect
rubber seal for cracks, wear or deterioration prior to use.
Always keep cylinder (tank) in upright position during use, transit or storage.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
WARNING
DANGER
4

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido