12.4 Manual wind gauge and rain
gauge registration on the
weather station
After the batteries have been replaced in the wind
gauge and rain gauges, they must be registered
again on the weather station. After replacing the
batteries and calibrating the wind gauge, press the
CHANNEL / SEARCH button on the weather station
for approx. 5 seconds. The entry is confirmed with
a confirmation tone. The measurement value dis-
plays now flash on the wind gauge and rain gauge
displays. The process can take up to 4 minutes
13. Weather station basic settings
13.1 Setting
– 12 / 24 hour format
– Time
– Date format
– Date
Jump to the next menu item with the CLOCK button.
Press ▲ and ▼ to make the settings. If none of the set-
ting buttons has been pressed for approx. 60 seconds,
the weather station returns automatically to the time
display.
12/24 hour format:
While in the time display, press the CLOCK button for
approximately 3 seconds to access the setting mode.
24 h flashes on the display. Press ▲ and ▼ to switch
between 24 h and 12 h display. AM / PM is displayed
to the left of the time in 12 h display mode.
Hours:
Press the CLOCK button to set the hour. The hours
now flash on the display. Use ▲ and ▼ to set the hour.
Preparing the wind... / Weather station basic settings
Minutes:
Press the CLOCK button again to set the minutes.
The minutes now flash on the display. Use ▲ and ▼
to set the minutes.
Year:
Press the CLOCK button a second time to set the
year. The year now appears on the display. Use ▲
and ▼ to set the year.
Date format:
Press the CLOCK button again to set the month for-
mat. The letters D (D = Day) and M (M = Month)
flash in the date on the display. Use ▲ and ▼ to set
the date format.
Month:
Press the CLOCK button again to set the month. The
month now flashes on the display. Press ▲ and ▼ to
set the month.
Day:
Press the CLOCK button again to set the day. The
date now flashes on the display. Press ▲ and ▼ to
set the day.
GB/IE
33