Copy Card Reader-F1; Super G3 Fax Board - Canon imageRunner ADVANCE C5051 Guía De Usuario

Copy Card Reader-F1

Available Cards
Card Readout Method
Magnetic Card Reading Direction
1
Store/Replay
Power Source
Dimensions (H x W x D)
Weight

Super G3 FAX Board

Specifications remain the same even when the Super G3 2nd Line FAX Board is installed.
Telephone Line Used
Scan line Density
(Scan, Transmission)
Transmission Speed
Compression Method
Transmission Type
Sending Original Sizes
Receiving Paper Sizes
Transmission Times
Auto Dial Function
Image Memory
*1 When using an IP telephone service, facsimile communication may not be performed normally via an IP telephone line. It is recommended to use facsimile communication via a general
telephone (Public Switched Telephone Network) line.
*2 Pels stands for picture elements (pixels).
1-14
Specifications
Item
Magnetic
Magnetic readout
Face up
Replay
From the main unit
40 mm x 88 mm x 96 mm (Excluding the attachment kit and cable)
Approximately 191 g (Including the attachment kit and cable)
Item
Public Switched Telephone Network
*1
Normal:
Fine:
Super-Fine:
Ultra-Fine:
Super G3: 33.6 kbps, G3: 14.4 kbps
MH, MR, MMR, JBIG
Super G3, G3
A3, A4, A4R, A5*, A5R*
* Sent as A4
A3, A4, A4R, A5, A5R
ECM-MMR:
G3MR method:
G3MH method:
JBIG:
Address Book: 1,800 destinations
(including destinations stored in one-touch buttons)
Approximately 6,000 pages
Specifications
Specifications
8 pels /mm x 3.85 line/mm
*2
8 pels *2 /mm x 7.7 line/mm
8 pels /mm x 15.4 line/mm
*2
16 pels /mm x 15.4 line/mm
*2
Approximately 3.2 seconds
Approximately 13 seconds
Approximately 13 seconds
Approximately 2.6 seconds