Setting The Functions - LG LSMX211ST El Manual Del Propietario

Setting The Functions

Setting The Metered Fill Unit
You can change the unit of Me-
tered fill.
As you can see the left, the initial
unit after power on is OZ.
The unit is changed to CUPS
when you press and hold this
button at least 3 seconds and
when you press it again, changed
to OZ.
While water is dispensed, the
numbers will be increase.
Setting The Dispenser
You can select the ice type of the
dispenser.
The default setting is CRUSHED
ice.
Press CUBE to get cubes instead
of crushed ice.
Setting The Light
You can control the lamp in the dispenser.
The lamp is off when the power on.
When you press the LIGHT button, the lamp
turns on, the icon also on.
When you press it again, the lamp turns off,
and the icon also turns off.
Setting The Filter Reset
You need to reset filter remaining period
after replacing filter.
Press and hold the FILTER RESET button
more than 3 seconds to reset the filter
indicator after the water filter has been
replaced.
The figure is changed 6
more than 3 seconds.
NOTE: It is recommended that the fi lter be
replaced when the indicator light on the front
dispenser reaches 0.
Activating Ice Plus
Activating Energy Saving
Setting The Door Alarm
Setting The Dispenser Lock
0 after pressing it
Press the ICE PLUS button to activate the
ICE PLUS function.
The ICE PLUS function runs the freezer com-
partment at the coldest setting for 24-hour
to increase ice making and then turns off
automatically.
To deactivate this function, press it again.
Press the ENERGY SAVING button for at
least 3 seconds to activate or deactivate the
function.
This function is recommended for added
energy savings. (Some heaters to reduce
excess moisture
on the refrigerator may be turned off)
The energy saving function is also
recommended during long periods
of time spent away from home-like vacation.
The ALARM button also controls the door
alarm that sounds three times in 30-second
intervals when a compartment door is left
open for more than 60 seconds. The alarm
stops sounding when the door is closed.
Press the ALARM button once to activate
and deactivate the door alarm function.
NOTE: Contact authorized service center if the
alarm continues to sound after the doors are
closed.
Press and hold the LOCK button for three
seconds to lock the dispenser and all of the
other control panel functions. Press and hold
again for 3 seconds to unlock.
HOW TO USE 27