General Description. Technical Characteristics; Accessories - gala gar SMART 200 MP Manual De Instrucciones

1. GENERAL DESCRIPTION. TECHNICAL CHARACTERISTICS.

This equipment enable the electric multiprocess welding : MIG/MAG welding, MMA welding and TIG DC welding
with lift-arc striking.
TECHNICAL CHARACTERISTICS TECHNICAL CHARACTERISTICS TECHNICAL CHARACTERISTICS TECHNICAL CHARACTERISTICS
Input voltage U1 (1Ph. 50-60Hz)
Maximum input intensity I1max
Maximum effective intensity I1eff
Welding voltage U2min - U2max.
Continuous MIG/MAG adjustment margin I2min-I2max 25 ÷ 200 A
MIG welding intensity l2
Applicable wire diameters (mm.)
Wire reels
Wire speed (m/min.)
Continuous MMA/TIG adjustment margin I2min-I2max
Mechanical protection index (IP class)
Ventilation
Weight
Dimensions
According to UNE-EN 60974.

1.1 ACCESSORIES.

SUPPLIED AS STANDARD WITH EQUIPMENT: SUPPLIED AS STANDARD WITH EQUIPMENT: SUPPLIED AS STANDARD WITH EQUIPMENT: SUPPLIED AS STANDARD WITH EQUIPMENT:
DESCRIPTION
Instructions Manual - SMART 200 MP
Input cable 3x4 mm2 (1A/V) 3 m. (Plug incl.)
Machine-gas connection (2 m) / coupling
Earth clamp cable
Wire reel Ø30, 0.8-1.0 mm "V"
RECOMMENDED IN MIG/MAG PROCESS : RECOMMENDED IN MIG/MAG PROCESS :
RECOMMENDED IN MIG/MAG PROCESS : RECOMMENDED IN MIG/MAG PROCESS :
REFERENCE DESCRIPTION
517.12.090 Mobile Workstation (Please refer Section 2).
517.81.007 Adapter assy for wire reel 15 kg (Please refer Section 2).
376.00.000 Argon pressure reducing valve – Mod. EN 2
355.00.000 Welding shielding gas saver valve.
215.00.003 MIG MAXIMA MX-15 torch (3 m)
225.00.004 MIG MAXIMA MX-25 torch (4 m)
5777 Automatic electronic shield
RECOMMENDED IN TIG PROCESS : RECOMMENDED IN TIG PROCESS : RECOMMENDED IN TIG PROCESS : RECOMMENDED IN TIG PROCESS :
190.51.704 TIG XT-17 V torch (4 m)
376.00.000 Argon pressure reducing valve – Mod. EN 2
5777 Automatic electronic shield
RECOMMENDED IN MMA PROCESS : RECOMMENDED IN MMA PROCESS : RECOMMENDED IN MMA PROCESS : RECOMMENDED IN MMA PROCESS :
259.040 Electrode 300 A-35/50 accessories
1701000 Electric electrode heater (Thermostat and Thermometer)
GALA GAR has a complete range of welding accessories where you can find those most suited to
your needs. For use of any other accessory check with the manufacturer.
USE ONLY THE RECOMMENDED SPARE PARTS AND ACCESSORIES.
SMART 200 MP
(1)
Other power supply voltage values on demand.
(1)
NEVER USE THESE WELDING MACHINES TO DEFROST TUBES.
SMART 2 2 2 2 0 0 0 0 0 MP SMART SMART SMART 0 MP 0 MP 0 MP
Ref. Ref. 223 Ref. Ref. 223.00. 223 223
230 V± 10 %
25 A
9.2 KVA
15 ÷ 24 V
200 A (35%)
0.8 ÷ 1.0
5 Kg. (15 kg adapter inc.)
1.5 ÷ 16 m/min
20 ÷ 180 A (35%)
21
Forced
9.8 Kg.
280x570x460 mm
15
.00.2 2 2 2 00 .00. .00. 00MP 00 00 MP MP MP