Electrical Connections - Nilfisk Alto MAXXI WD 3 Instrucciones De Manejo

ELECTRICAL CON NEC TIONS
(Only applicable to UK)
DOUBLE-INSULATED MACHINES - IMPORTANT
This 240 volt 50 Hz. machine are fi tted with a 13 amp. 3 pin
moulded plug. The plug is fi tted with a 13 amp. detachable fuse.
The correct replacement for the fuse is identifi ed by marking
or colour coding. Only fuses that are ASTA approved to BS
1362 should be fi tted. Never use the plug without the fuse
cover fi tted. Replacement fuse covers are available at any
electrical retail outlet.
If the available socket outlet is not suitable for the plug supplied,
the plug must be cut off and an appropriate plug fi tted. The
plug thus cut off MUST BE DESTROYED for safety reasons
before being disposed of.
Machines built for other voltages and frequencies are not nor-
mally supplied with a fi tted plug.
If it is necessary to fi t a plug, the wires in this power supply cord
are coloured in accordance with the following code:
BLUE-NEUTRAL
BROWN-LIVE
TO CONNECT THE NEW PLUG:
If using a three-pin plug, do not make any connection to the
the terminal in the plug which is marked with the letter 'E' or by
the safety earth symbol or coloured green or green & yellow.
This machine is double-insulated and no earth connection is
necessary.
The blue wire must be connected to the terminal in the plug which
is marked with the letter 'N' or is coloured black or blue.
The brown wire which must be connected to the terminal in
the plug which is marked with the letter 'L' or is coloured red
or brown.
If the plug to be fi tted does not conform to the above notation
then consult a qualifi ed electrician.
9