Midland G11V Manual De Uso página 29

Reception is fragmen-
ted and/or disturbed
Transmission is not
always possible
VOX causes the radio
to accidentally enable
transmission
The VOX feature requi-
res speaking in a loud
voice
The autonomy of the
battery pack is limited
Logic related faults
(unreadable displayed
symbols, functions
blocked, etc.)
Midland G11V instruction guide
The signal is very weak.
The transmission di-
stance is excessive and/
or there are obstacles in
the transmission path
Other parties are using
the same channel
The radio has been
installed too close to
equipment that causes
interference (televi-
sions, computers, etc.)
The channel is used by
an excessive number of
parties or the transmis-
sion has been barred
due to a busy channel.
The sensitivity and/or
environmental
noise is too high.
The sensitivity is too
low.
Commission time is too
high.
Incorrect setting cau-
sed by a problem with
the power supply.
Try temporarily to
disable the Squelch by
means of the Monitor
feature.
Move closer to the par-
ty you are communica-
ting with or to another
area.
Check the traffic on the
radio channel by means
of the Monitor feature
and select another
channel if required.
Increase the distance
between the radio and
this equipment.
Select another channel.
Ask the radio link provi-
der to disable the block
due to busy channel.
Reduce the VOX sen-
sitivity.
If the environmental
noise is not high,
increase the sensitivity
or use an optional
microphone.
Try reducing the
transmission time and/
or using a low power.
Recharge the battery
pack
| 11