Troubleshooting - Klarstein Windwalker Manual De Instrucciones

TROUBLESHOOTING

CAUTION
Risk­of­electric­shock,­fi ­ re­and­explosion! Do not repair the air
conditioner by yourself as wrong maintenance may cause electric shock
or fi re or explosion. Contact the manufacturer, customer service or a
similarly qualifi ed technician and let the professionals conduct the
maintenance.
Checking the following items in the table below prior to contacting for maintenance can
save your time and money.
Problem
The air conditioner does
not work.
The air conditioner cannot
run after the immediate
start-up after it is shut
down.
The air conditioner stops
running after it starts up
for a while.
Possible Cause
1.) There might be power
outages.
2.) Power plug may be
loose out from the socket.
3.) Power switch fuse
may blow.
4.) The time for timing
boot is yet to come.
Safety function
1.) The set temperature
has been reached.
2.) The appliance is in
defrost mode.
3.) The time set in the
timer has elapsed.
Solution
1.) Wait until power is
restored.
2.) The plug in the plug
tightly.
3.) Have the fuse
replaced.
4.) Wait or cancel the
timer settings.
If the air conditioner is
turned on immediately
after it is turned off, the
protective delay switch
will delay the operation
for 3 to 5 minutes.
1.) It is a normal function
phenomenon, that the
appliance switches off
when the set temperature
has been reached.
2.) It will automatically
restore and run again
after defrosting.
3.) If you want to
continue the usage,
please turn the appliance
on again.
EN
89