Troubleshooting/Specifications - Sanyo ECJ-M100S Instrucciones De Funcionamiento

Sanyo_901089:ECJ_M100
TROUBLESHOOTING
• Plug or power cord is damaged, distorted, expanded, or discolored.
• Power cord or plug is warmer than normal.
• Power cord fits loosely or loses power.
• Overheated main body produces burning odor.
The power plug blades or plug surfaces are dirty.
Symptom
Is the power cord plugged in properly or has a power failure occurred?
Rice does not
Has the cook menu button been depressed?
cook.
Was adequate water added to the Inner Pot?
Is the power cord plugged in properly or has a power failure occurred?
Was adequate water added to the Inner pot?
Rice is hard or
Was the rice stirred thoroughly after cooking?
undercooked.
Was the correct menu function selected?
Are there any foreign objects sticking to the exterior of the Inner Pot, Sensor,
Heating Element, or in Lid Seal?
Was too much water added to the Inner Pot?
Was the rice stirred thoroughly after cooking?
Rice is soft or
Are there any foreign objects sticking to the exterior of the Inner Pot, Sensor,
sticky.
Heating Element, or in Lid Seal?
Was the correct menu function selected?
Was adequate water added to the Inner Pot?
Are there any foreign objects sticking to the exterior of the Inner Pot, Sensor,
Rice is scorched.
Heating Element, or in Lid Seal?
Was the correct menu function selected?
Was rice washed thoroughly before cooking?
Is the power cord plugged in properly or has a power failure occurred?
Was too much water added to the Inner Pot?
Rice cooking
Was the correct menu function selected?
takes too long.
Are there any foreign objects sticking to the exterior of the Inner Pot, Sensor,
Heating Element, or in Lid Seal?
Is the power cord plugged in properly or has a power failure occurred?
While using the
Was the rice stirred thoroughly after cooking?
Keep Warm
function, the rice Was rice washed thoroughly before cooking?
becomes hard,
Are there any foreign objects sticking to the exterior of the Inner Pot, Sensor,
discolored, or
Heating Element, or in Lid Seal?
develops an odor.
Has the rice been kept warm for over 8 hours?
Was too much water added to the Inner Pot?
Are there any foreign objects sticking to the exterior of the Inner Pot, Sensor,
Water boils over
Heating Element, or in Lid Seal?
during cooking.
Was the correct menu function selected?
Was rice washed thoroughly before cooking?
Was the correct amount of water added to the Inner Pot?
Steam leaks out
Was the correct menu function selected?
from around the
Are there any foreign objects sticking to the exterior of the Inner Pot, Sensor,
lid.
Heating Element, or in Lid Seal?
Were water droplets present on the exterior of the Inner Pot or interior of Main
There is noise
during cooking.
Unit? Water droplets may cause noise during cooking. This is not a malfunction.
SPECIFICATIONS
MODEL No.
Power Source
Power Consumption
Cooking Capacity (uncooked)
Unit Dimensions (WxHxD)"
Weight
Cord Length
6/3/09 9:40 AM Page 12
Symptom
Possible Cause
Check the following before requesting service.
• Unplug the power cord and stop
using the appliance immediately.
Contact Sanyo Fisher Service
(see warranty, page 16).
Clean thoroughly.
ECJ-M100S
120 V 60 Hz
Cooking: 650 Watts
White Rice
Brown Rice
Sushi
Porridge
10 13/16" x 11" x 11"
7.3 lbs.
Approx. 47 1/4"
12
Remedy
Reference Page #
4, 6
6
6, 7
4, 6
6, 7
7
6, 7
4, 6, 11
6, 7
7
4, 6, 11
6, 7
6, 7
4, 6, 11
6, 7
6, 7
4, 6
6, 7
6, 7
4, 6, 11
4, 6
7
6, 7
4, 6, 11
7
6, 7
4, 6, 11
6, 7
6, 7
6, 7
6, 7
4, 6, 11
4, 6, 11
Keep Warm: 15 Wh
2 – 10 cups
2 – 8 cups
2 – 10 cups
0.5 – 2.5 cups