Enabling / Disabling Alarm For Motion Events - Lorex LW1740 Serie Guía Para Usuarios

8
Recording
4. The selected channel appears behind a blue grid. Use the arrow keys to
select a cell in the grid and press
motion detection area. By default, all cells are allowed in the motion detec-
tion area. Blocked cells have an 'X' in the center.
Shortcuts:
To block an entire row:
• Press
The entire row will be blocked from the motion detection area.
To allow an entire row:
• Press
The entire row will be allowed in the motion detection area.
5. Press

8.10 Enabling / Disabling Alarm for Motion Events

With the alarm enabled, the receiver will 'beep' when motion is detected by
one of your cameras during scheduled motion recording.
To enable / disable alarm:
1. Press
2. Press
or OFF to indicate the current setting.
#LX400030; r. 1.0/17112/17628; en-US
to block the first cell in the row, then hold the
to allow the first cell in the row, then hold the
repeatedly until all menus are closed.
, then select the Alarm icon.
to toggle the alarm on and off. The Alarm icon displays ON
to allow or block them from the
button.
button.
32