Tabla De Contenido - Craftsman 917.881060 Manual Del Proprietário

6. When cleaning, repairing o rinspecting thesnowthrower,
stoptheengine andmakecertain thecollector/impel-
ler and all movingpartshavestopped.Disconnect
thesparkplugwireandkeepthewireawayfromthe
plug. toprevent someone f romaccidentally starting the
engine.
7. Donot runthe engine indoors, e xcept w henstarting
theengine andfortransporting t hesnowthrower i nor
outof the building. Openthe outside doors;exhaust
fumes aredangerous.
8. Exercise extreme caution whenoperating o nslopes.
9. Never o perate t hesnowthrower without proper g uards,
andothersafety protective d evices inplace andwork-
ing.
10. Neverdirectthe discharge towardpeopleor areas
where property d amage canoccur.Keep children and
others away.
11. Donotoverload the machine capacity byattempting
toclearsnowattoofasta rate.
12. Neveroperate themachine at hightransport speeds
onslippery surfaces. Lookbehind andusecarewhen
operating i n reverse.
13. Disengage p ower t othecollector/impeller when snow
thrower i s transported o r notinuse.
14. Useonlyattachments andaccessories a pproved by
themanufacturer ofthesnowthrower ( suchaswheel
weights, counterweights, or cabs).
15. Never o perate t hesnow thrower w ithout g ood visibility
orlight. A lways besureofyourfooting, andkeepafirm
holdonthehandles. Walk;never r un.
16. Never t oucha hotengine or muffler.
Clearing a Clogged Discharge Chute
Hand contact with the rotating impeller inside the discharge
chute is the most common cause of injury associated with
snow throwers. Never use your hand to clean out the dis-
charge chute. To clear the chute:
1. SHUTTHE ENGINE OFF!
2. Wait 10 seconds to be sure the impeller blades have
stopped rotating.
3. Always use a clean-out tool, not your hands.
Maintenance and Storage
1. Check shear bolts and other bolts at frequent intervals
for proper tightness to be sure the equipment is in safe
working condition.
2. Never store the machine with fuel in the fuel tank
inside a building where ignition sources are present
such as hot water heaters, space heaters, or clothes
dryers. Allow the engine to cool before storing in any
enclosure.
3. Always refer to operator's manual for important details
if the snow thrower is to be stored for an extended
period.
4. Maintain or replace safety and instruction labels, as
necessary.
5. Run the machine a few minutes after throwing snow
to prevent freeze-up of the collector/impeller.
TABLE OF CONTENTS
SAFETY RULES ........................................................ 2-3
PRODUCT SPECIFICATIONS ...................................... 4
CUSTOMER RESPONSiBiLITIES ................................ 4
WARRANTY .................................................................. 4
ASSEMBLY / PRE-OPERATION ............................... 6-8
OPERATION ............................................................ 9=14
MAINTENANCE ..................................................... 15-16
MAINTENANCE SCHEDULE ..................................... 15
SERVICE AND ADJUSTMENTS ........................... 17=19
STORAGE ................................................................... 19
TROUBLESHOOTING ................................................ 20
REPAIR PARTS ..................................................... 40-55
SEARS SERVICE ................................... BACK COVER