NORPOLE NPPAC12HKM Manual Del Usuario página 16

NOTE: If the display shows one of the above codes turn off and unplug the unit, and check for any
obstructions or empty the water tray, then restart. If code is still present, turn off again and unplug,
and contact customer service or service technician for assistance.
OPERATING
Cool Mode
• Press the "MODE" button until the "COOL" indicator lights.
• Press the ADJUST buttons "+" or "-" to select your desired room temperature. The temperature can
be set within a range of 62°F~86°F /17°C~30°C.
• Press the "FAN SPEED" button to choose the fan speed.
Heat Mode
• Press the "MODE" button until the "HEAT" indicator lights.
• Press the ADJUST buttons "+" or "- "to select your desired room temperature. The temperature can
be set within a range of 62°F~86°F (17°C~30°C).
• Press the "FAN SPEED" button to choose the fan speed. For some models, the fan speed cannot be
adjusted under HEAT mode.
Dry Mode
• Press the "MODE" button until the "DRY" indicator lights.
• The fan motor operates at LOW speed and cannot be changed. You cannot adjust the temperature
in this mode.
• Keep windows and doors closed and do not run the exhaust duct to window.
Auto Mode
• Press the "MODE" button until the "AUTO" indicator lights.
• When in AUTO mode, cooling, heating (if applicable), or fan only will be automatically selected to
maintain the room temperature the unit is set for.
• When in AUTO mode, fan speed cannot be changed.
Fan Mode
• Press the "MODE" button until the "FAN" indicator lights.
• Press the "FAN SPEED" button to choose the fan speed. The temperature cannot be adjusted.
• Do not run the exhaust duct to window.
Timer Mode
• If the unit is on, pressing the Timer button once will start the Auto-Off stop program, and the Off
• indicator light above the timer button will be lit. Pushing the Timer button again within 5 seconds will
switch to the Auto-On start function, and the On indicator will be lit.
• If the unit is off, pushing Timer will start the Auto-On start feature, and pushing it again within 5
seconds will switch it to the Auto-Off stop feature.
• Press or hold the UP or DOWN button to set the Auto time in 0.5 hour increments, up to 10 hours,
then in 1 hour increments up to 24 hours. The control will count down the time remaining until
starting or stopping.
16