Swing Button - Keystone KSTAP12A Manual Del Usuario

SWING button

FOLLOW ME FAN
FOLLOW ME
FOLLOW ME
7
F C
FEATURE
F C
AIR CONDITIONER FEATURES
Use the SWING button to initiate the airflow
direction setting operation(This button is available
only when the unit is on ).
1. Press the SWING
activated.
2. Each press will change the swing angle for 6 .
Keep pressing the button to move the horizontal
louver to the desired position.
If keep pressing the SWING button without
releasing for 2 more seconds, the horizontal
louver would swing up/down automatically.
3. Press the SWING button again to stop the
movement.
NOTE:
The remote control serves as a remote
thermostat allowing for the precise
temperature control at its location.
To activate the Temp Sensing feature, point the remote
control towards the unit and press the FOLLOW ME
button. T he remote display is actual temperature at its
location. The remote control will send signal to the air
conditioner every 3 minutes interval.
If the unit does not receive the Temp Sensing signal
during any 7 minutes interval, the FOLLOW ME
indicator light turns off to indicate the Temp Sensing
mode has ended.
The actual temperature can be displayed at the unit
by pressing the Fan Only mode. When in the Cool
mode, the unit display indicates the set temperature.
button, the swing feature is
o