Keystone KSTAP12A Manual Del Usuario página 16

Window
panel
Foam seal
13
Installation in a sliding sash windows
Foam seal A
1. Cut the foam seal(adhesive type) to the proper length and
(adhesive type)
Fig.14
2. Attach the window slider kit to the window stool. Adjust the
12K Model
26.5 "~ 48"
14K Model
22.1" ~ 38.6"
Fig.15
3. Cut the foam seal(adhesive type) to the proper length
4. Close the sliding sash securely against the window.
Fig.16
5. Cut the foam seal to an appropriate length and sealing the
Fig.17
INSTALLATION INSTRUCTIONS
attach it to the window frame. See Fig.14.
length of the window slider kit according to the width of
window, shorten the adjustable window kit if the width of
window is less than 27 inches.
Open the window sash and place the window slider kit on
the window stool. See Fig.15.
and attach it on the top of the window. Shown as in Fig.16.
open gap between the top window sash and outer window
sash. Shown as in Fig.17.