Led Display - Keystone KSTAP12A Manual Del Usuario

FAN button
F C
UP( ) and DOWN(
Press to increase
F C

LED Display

F C
AIR CONDITIONER FEATURES
) button
Press to decrease
NOTE:
Used to select the Fan Speed in four steps-
Low, Med ,High or Auto(No indicator light
illuminates). Each time the button is pressed,
the fan speed mode is shifted.
NOTE:
Press or hold either UP or DOWN button
until the desired temperature is seen on the
display. This temperature will be automatically
maintained anywhere between 62 F(17 C) and
88 F(30 C). If you want the display to read the
actual room temperature, see To Operate on
Fan Only" section.
The control is capable of displaying temperature
in degrees Fahrenheit or degrees Celsius. To
convert from one to the other, press and hold the
UP and DOWN buttons at the same time for 3
seconds.
NOTE:
Sh ows the s et te mperature in
" O "
F a nd the Au to-tim er s ettings .
Wh ile on DRY and FA N mo de s, it s hows
the room temp eratu re.
Error codes:
E1- Room temperature sensor error-
Unplug the unit and plug it back in.
If error repeats, call for service.
E2- Evaporator temperature sensor error-
Unplug the unit and plug it back in.
If error repeats, call for service.
P1- Bottom tray is full - Remove the bottom
plug and attach the drain hose and drain
the water away. If error repeats, call for
service.
"
" O "
C or
6