Building-In - chromagen GR30 Manual De Instalacion Y Uso

Dear buyer, we thank you for purchase of our product.
Prior to installation and first use of the electric water heater, please carefully read these instructions.
This water heater has been manufactured in compliance with the relevant standards and tested by the relevant
authorities as indicated by the Safety Certificate and the Electromagnetic Compatibility Certificate. The technical
characteristics of the product are listed on the label affixed between the inlet and outlet pipes. The installation
must be carried out by qualified staff. All repairs and maintenance work within the water heater, e.g. lime removal
or inspection/replacement of the protective anticorrosion anode, must be carried out by the authorised
maintenance service provider.

1.- BUILDING-IN

The water heater shall be built-in as close as possible to the outlets. It has to be fitted to the wall using appropriate
rag bolts with minimum diameter of 8 mm. The wall with feeble charging ability must be on the spot where the
water heater shall be hanged suitably reinforced. The water heater may be fixed upon the wall either verticaly or
horizontaly with water connections on left side.
Outlet
pipe
VERTICAL
2.- TECHNICAL PROPERTIES OF THE APPLIANCE
Model
Volume
Declared load profile
(1)
Energy efficiency class
Water heating energy efficiency (ƞwh)
Annual electricity consumption
Daily electricity consumption
Thermostat temperature settings
Value of "Smart"
Rated pressure
Weight / Filled with water
Anti-corrosion protection of tank
Connected power
Voltage
[ h 
Heating time to 65°C
(3)
Quantity of mixed water at 40°C V40
(4)
Energy consumption 24h
(1) EU Regulation 812/2013; EN 50440.
(2) EN 50440
(3) Time for heating of the whole volume of heater with electric immersion heater by entering temperature of cold water from water supply
10ºC.
(4) Energy consumption to maintain stable temperature of water in the water heater 65°C at surrounding temperature 20°C, measured
according to DIN 44532.
INSTALLATION MANUAL
Heating
element
Outlet
pipe
Inlet
pipe
Inlet
pipe
GR30
[ l ] 30,4
S
C
[ % 
(1)
32,9
[Kwh 
(1)
560
[Kwh 
(2)
2,69
"eco"
0
[ MPa ]
[ kg ] 15.5/45.5
[ W ]
[ V~ ]
59
0
(2)
[ l ] -
[kWh/24h ] 0,90
HORIZONTAL
GRU50 GRU80 GRU100
47,5 76,1
M M
D D
33,6 33,3
1522 1530
7,26 7,38
"eco" "eco"
0 0
0,9
21/71 27/107
Magnesium anode
2000
230
38 37
1 2
66,5 96,5
1,23 1,57
ENGLISH
Heating
element
GRU150 GRU200
96,1 146,1
L XL
D D
35,5 36,1
2884 4643
13,57 21,76
"eco" "eco"
0 0
31/131 41/191
16 54
3 4
131,4 211,8
1,78 2,06
195,4
XL
D
35,2
4756
22,43
"eco"
0
65/265
32
6
274,2
3,00