Inserting/Replacing The Batteries; Initial Operation - Bosch GLL 2-20 Professional Instrucciones De Servicio

11 Working without automatic levelling indicator
12 Universal holder*
13 Rotary knob of the universal holder
14 Holding plate of the universal holder
15 Base plate of the universal holder
Dados técnicos
Technical Data
Cross-line Laser
Article number
Working range (diameter), to approx.
Levelling Accuracy
Self-levelling range, typically
Levelling duration, typically
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
C
6
Tripod mount
Batteries
Rechargeable batteries
Operating time, approx.
Weight according to EPTA-Procedure 01/2003
Dimensions
1) The working range can be decreased by unfavourable environmental conditions (e.g. direct sun irradiation).
The measuring tool can be clearly identified with the serial number 20 on the type plate.
Assembly

Inserting/Replacing the Batteries

Using alkali-manganese or rechargeable batteries is
recommended for operation of the measuring tool.
To open the battery lid 5, press on the latch 6 and fold the
battery lid up. Insert the batteries/rechargeable batteries.
When inserting, pay attention to the correct polarity
according tothe representation on the inside of the battery
lid.
Always replace all batteries/rechargeable batteries at the
same time. Do not use different brands or types of
batteries/ rechargeable batteries together.
u Remove the batteries/rechargeable batteries from
the measuring tool when not using it for longer
periods. When storing for longer periods, the
batteries/rechargeable batteries can corrode and
self-discharge.
Operation

Initial Operation

u Protect the measuring tool against moisture and
direct sun light.
u Do not subject the measuring tool to extreme
1 609 92A 16T | 02.2015
Manual GLL 2-20.indd 15
16 1/4" screw of the universal holder
17 Tripod*
18 Protective pouch
19 Laser viewing glasses*
20 Serial number
* The accessories illustrated or described are not included as
standard delivery.
(1)
temperaturesr variations in temperature. As an
example, do not leave it in vehicles for a long time. In
case of large variations in temperature, allow the
measuring tool to adjust to the ambient temperature
before putting it into operation.
In case of extreme temperatures or variations in
temperature, the accuracy of the measuring tool can be
impaired.
u Avoid heavy impact to or falling down of the
measuring tool. Damage to the measuring tool can
impair its accuracy. After heavy impact or shock,
compare the laser line with a known horizontal or
vertical reference line.
u Switch the measuring tool off during transport.
When switching off, the levelling unit, which can be
damaged in case of intense movement, is locked.
Switching On and Off
To switch on the measuring tool, slide the On/Off switch 2
to the "On" position. Immediately after switching on, the
measuring tool sends laser beams out of the exit openings 1.
u Do not point the laser beam at persons or animals
and do not look into the laser beam yourself, not
even from a large distance.
15
English |
GLL 2-20
3 601 K63 JD0
20 m
±0,4 mm/m
±4°
4 s
+5 °C ... +40 °C
–20 °C ... +70 °C
90 %
2
635 nm, <1 mW
1
1/4"
4 x 1,5 V LR6 (AA)
4 x 1,2 V HR6 (AA)
12 h
0,5 kg
125 x 85 x 70 mm
Bosch Power Tools
17/04/15 16:18