Configuration (Ttrtc Tyxal+ And Ttgsm Tyxal+) - DELTA DORE TTRTC TYXAL+ Manual De Instalación

9. Operation in autonomous mode

9.4 Configuration (TTRTC TYXAL+ and TTGSM TYXAL+)

8.5.1 Call the transmitter
(If a CS 8000 TYXAL+ alarm control unit is associated with the TTRTC TYXAL+ transmitter,
it must be in maintenance mode, see system guide).
The line is picked up immediately in the case of a TTGSM TYXAL+ transmitter.
Method 1,
from another telephone line (mobile or landline)
Ring Ring... Ring
Dial the call number of the
installation.
Method 2 to
be used in the following situations:
- when you call a mobile phone (if it hangs up before the 10th ring),
- when the transmitter cohabits with a telephone answering machine
or a message service.
Ring Ring... Ring
Dial the call number of
the installation.
Wait for 2 rings
To prevent the transmitter from accidentally picking up the line during two successive calls,
you can deactivate method 2 by entering the following sequence from the main menu: #82 6 1
To reactivate it: #82 6 0
To select
French, press 1...
Wait for
10 rings
The transmitter picks up the line after
about 10 rings by default (number of
rings can be changed).
Hang up
Wait for
10 seconds
68
To select
French, press 1...
Dial the call number of the
installation again.
The transmitter picks up
after 1 or 2 rings