9. Operation in autonomous mode
9.6 Configuration menu
- For the number 1, press 1.
- For the number 2, press 2.
- For the number 3, press 3.
- For the number 4, press 4.
- For the number 5, press 5.
- For the number 6, press 6.
- To return to the previous menu, press
To personalise the voice message, press 2
This is the configured voice message:
"You are connected with a telephone
transmitter"
- To modify the voice message, press 1.
- To return to the previous menu, press
To modify the access code, press 3
Enter your access code
To modify the date or time, press 4
This is the configured date:
29 November 2013,
This is the configured time: 11h57.
- To modify the date, press 1.
- To modify the time, press 2.
- To return to the previous menu, press
To configure the number of rings, press 5
This is the configured number of rings: 10
- To modify it, press 1.
- To return to the previous menu, press
To change the language, press 6.
To select French, press 1.
To select English, press 2.
To select Spanish, press 3.
To select German, press 4.
To select Italian, press 5.
To select Polish, press 6.
To select Dutch, press 7.
To return to the previous menu, press
To disconnect the call, press twice on
No call number is configured.
To configure it, press 1.
- To return to the previous menu, press
Enter the new call number and press
This is the configured number:
02.99.73.xx.xx
To modify it, press 1.
To delete it, press 2.
- To return to the previous menu, press
Enter the new call number and press
Please speak after the tone, then press
a key to stop recording.
Enter the new access code
Enter the 6 date digits
Enter the 4 time digits
Enter the 4 time digits
To select the AM format, press 1
To select the PM format, press 2
Enter the 2 digits for the new number
of rings
Action accepted
70
Action accepted
This is the configured
number...
Action accepted
This is the configured voice message:
"You are connected with a telephone
transmitter"
- To modify the voice message, press 1.
- To return to the initial voice message,
press 2.
- To return to the previous menu, press
Action accepted
29 November 2013, 11h57.
- To modify the date, press 1.
- To modify the time, press 2.
- To return to the previous menu, press
( TTRTC TYXAL+ only)
Action accepted
Configuration menu
Configuration menu
Configuration menu
Configuration menu