General Warnings; Fundamental Safety Rules - CLIMAVENETA HWD 602 Manual Del Usuario

Unidades terminales de conductos hidrónicos con mando electrónico y electromecánico
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

GENERAL WARNINGS

HWD terminal units are the internal units of a
ductable hydronic system. When used in combination
with water chillers, they form a cooling only system,
when used with reversible water chillers/heat pumps,
they form a cooling and heating system.
Incorrect installation, regulation and maintenance,
improper use or installation by unqualified person-
nel absolves the manufacturer from all liability,
whether contractual or otherwise, for damage to
people, animals or things. Only those applications
specifically indicated in this list are allowed.
Read this manual carefully. All work must be
carried out by qualified personnel in conformity
with legislation in force in the country concerned.
The guarantee is invalidated if the above in-
structions are not respected and if the unit is start-
ed up for the first time without the presence of per-
sonnel authorised by the Company (where specified
in the supply contract) who should draw up a "start-
up report".

FUNDAMENTAL SAFETY RULES

When using this unit, which requires electricity and water,
a number of fundamental safety rules must be observed,
namely:
The unit must not be used by children or by un-
fit persons without suitable supervision.
Do not touch the unit with bare feet or with wet
or damp parts of the body.
Do not carry out cleaning operations without
first disconnecting the unit from the electricity sup-
ply by placing the mains switch in the "off" position.
Do not modify safety or regulation devices
without authorisation and instructions from the
manufacturer.
Do not pull, detach or twist the electrical cables
coming out of the unit, even when disconnected
from the mains electricity supply.
Do not open doors or panels providing access to
the internal parts of the unit.
Do not dispose of, abandon or leave within reach
of children packaging materials (cardboard, staples,
plastic bags, etc) as they may represent a hazard.
Respect safety distances between the unit and other
equipment or structures. Guarantee suitable space for ac-
cess to the unit for maintenance and/or service operations.
2
English 07/13
U
The documentation supplied with the unit
must be consigned to the owner who should keep it
carefully for future consultation.
When the items are consigned by the carrier,
check that the packaging and the unit are undam-
aged. If damage, missing components or consign-
ment errors are noted, indicate this on the delivery
note. A formal complaint should be sent via fax or
registered post to the After Sales Service within
eight days from the date of receipt of the items.
All the operations involved in handling, installing,
starting up and testing the unit must be carried out
by qualified personnel. Failure to observe this warn-
ing could cause serious damage.
U
The unit must be installed in a closed technical
room. The fan outlets must be protected with ducts
or grills preventing access to the impellers.
Power supply: the cross section of the electrical
cables must be adequate for the power of the unit
and the power supply voltage must correspond with
the value indicated on the respective units. All units
must be earthed in conformity with current legisla-
tion in the country concerned.
Hydraulic connections should be carried out as
indicated in the instructions to guarantee correct
operation of the unit.
Handle the unit with the utmost care (see
table on page 3) and avoid damaging it.
I
A
I
A
HWD

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hwd 703Hwd 803Hwd 904Hwd 1003Hwd 1104

Tabla de contenido