Installing Accessories - CLIMAVENETA HWD 602 Manual Del Usuario

ACCESSORIES
LAYOUT OF ACCESSORIES
8 7
G E
1 ductable unit
2 two way intake plenum with winter
damper (fitted inside unit)
Size
A
602 - 703 820
803 - 904 1050
1003 -1104 1050

INSTALLING ACCESSORIES

All modules are supplied ready for fixing to the discharge
and intake flange of the basic unit, another module or di-
rectly to the ducting.
Always include the gasket supplied between one module
and another.
TWO WAY INTAKE PLENUM WITH DAMPER
The two way intake plenum with damper enables the room
air intake duct and the external air intake duct to be
connected when required by the installation.
Regulation is via a manual damper that may be motorised
A
40 D
20 English 07/13
6 5
F F
3 intake plenum
4 auxiliary water coil for heating
5 electric heater module
B C D E
820 255 255 280
945 255 285 280
1050 305 305 330
C
P
X
1 4
6 humidifier module
7 discharge plenum
8 discharge plenum for round ducting
Dimensions
F G H øL
200 170 285 160
200 170 285 160
200 170 330 200
Fit a grid protecting the impellers if accessories are
not mounted.
Note: if the humidifier module is connected di-
rectly to the discharge, remove the lower part of
the duct rim.
following removal of the manual hand wheel (the motorised
control is not provided). The cross section of the external
air intake duct is 25% the total cross section.
B
Size
602- 703
803 - 904
1003 -1104
10 9 3
R H
9 air purification module
10 activated carbon filter
N X P Y
4 254 295 77
4 254 295 77
4 267 314 89
Amm Bmm Cmm Dmm
820 280 225 775
945 285 205 1000
1050 330 225 1000
I A
2
H
Q R
149 350
149 350
157 350
Emm Hmm
210 255
240 285
260 305
HWD