Receiving, Handling And Storage - ABB EOH Série Boletín De Instrucciones

Receiving, handling and storage

Receiving and handling
Upon receipt, carefully inspect the switch for damage that may
have occurred during transit. If damage is evident, or there is
visible indication of rough handling, immediately file a damage
claim with the transportation company, and notify your local
ABB sales office.
Do not remove the shipping package until ready to install the
switch.
WARNING
HAZARD OF EQUIPMENT OVERTURNING
When moving with a fork lift, do not remove the shipping package until
the device is in its final location.
Failure to follow this instruction will result in personal injury or
equipment damage.
Instruction Bulletin EOH361/2/3JK/RK/S/SS/NJK/NRK/NS/NSS, 1SCC340030M1402 / B | Receiving, handling and storage 1/3
Storage
If the unit will not be placed into service immediately, store
the switch on its original package in a clean, dry location. To
prevent condensation, maintain a uniform temperature. Store
the unit in a heated building, allowing adequate air circulation
and protection from dirt and moisture. Storing the unit outdoors
could cause harmful condensation inside the switch enclosure.
1