Publicidad
Idiomas disponibles
Idiomas disponibles
● Remove the cover
● Carefully drive the Fielbus module into its
location.
● Tighten the 2 screws by using a T9 Torx
screwdriver.
● Power on the controller.
fieldbus MOdule diAGNOsTiC
CVi ii range
● From the CVI II / PLC parameters screen,
press the F1 key to display the following
screen:
03/2012
CVix ii range
● From the CVIx II / PLC parameters screen,
press the printer button then left or right
arrows to visualize the module "Information
screen":
ID : module identification number
- 8005 : Profibus
- 8025 : DeviceNet
- 8080 : Modbus TCP
- 8084 : Profinet IO
- 8085 : Ethernet/IP
- 8096 : Profinet IO 2 ports
- 809C : Ethernet/IP 2 ports
FW : module firmware version
6159931440
Issue no: 01
Series: -
7 / 32
Publicidad
