Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
9. Energy saving
mode
This appliance was designed in compliance with the European Directives
EC1275/2008 and 2009/125/EC, stating the need to adopt the energy
saving mode.
This appliance is equipped with a stand-by function that activates after
9 minutes of downtime; both lights of the dispensing buttons (3) turns
off, the appliance goes off and the power consumption in this status is
below 0.5 W.
To restart the machine it is necessary to press again the on/off button
(6) located on the back of the right panel. The machine will start the pre-
heating stage of the boiler (the lights of the dispensing buttons - 3 - blink)
and once it reaches operating temperature, it will indicate the ready state
(both lights of the dispensing buttons are steady on).
NOTE: Time of pre-heating is based on the downtime of the machine,
and can last up to 50 seconds if it has not been used for some hours.
50
Publicidad
Tabla de contenido
