Bialetti BREAK AUTOMATIC CF68 Instructiones De Uso página 52

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

EN
Problem
It is not possible to
lower the lever.
The machine is making
too much noise.
The capsule falls from its
compartment.
Both lights of the
dispensing buttons (3)
blink quickly.
52
10. Troubleshooting
The capsule is stuck or
badly positioned.
The compartment of
used capsules is full.
There is no water in the
tank.
The machine is not
stable on the support
surface.
The lever is not
completely raised.
Machine malfunctioning.
Cause
Solution
Unplug the machine
from the power mains
and wait for it to cool
down; lift the lever and
remove the capsule
manually. Use a tool,
never use fingers.
Empty the compartment.
Fill the tank with water.
Make sure it is posi-
tioned on a flat and rigid
surface.
Completely lower the
lever and open it until it
gets to its end point.
Switch off the machine
using the on/off button.
Wait 20 seconds and
switch the machine on
again. If the problem
still occurs, contact
an authorised service
centre.

Publicidad

Tabla de contenido
loading

Tabla de contenido