Initial Setup; Aa Battery Operation - Eton American Red Cross FR300 El Manual Del Propietario

American Red Cross FR300

INITIAL SETUP

1. Open the compartment; it slides downward with firm pressure
at center of hinge.
2. Connect the battery pack.
POWER SOURCES
1. Rechargeable battery pack (included).
2. 3 AA batteries (not included).
3. AC adapter/charger (not included).
4. Continually turning the crank, even with no batteries installed.
CHARGING THE BATTERY PACK
1. Switch the BATTERY/DYNAMO-ADAPTER/OFF switch to the
OFF position.
2. Turn the dynamo-crank clockwise or counter-clockwise about
2 turns per second for 90 seconds.
3. After charging, select the DYNAMO-ADAPTOR position for
power.
While charging, the red LED charging light illuminates.

AA BATTERY OPERATION

1. Open the battery compartment.
2. Install 3 AA batteries, observing polarity diagram.
3. For power, set the BATTERY/DYNAMO-ADAPTER/OFF switch
to the BATTERY position.
4
OWNER'S MANUAL