Connection B - Fore-Vacuum Pump; Connection C - Electrical - Agilent Technologies TV 1001 Navigator Manual De Istrucciones

17 Technical Information
TV 1001 Controller Installation

Connection B - Fore-Vacuum Pump

A flange KF 40 NW is available to connect the Turbo V1001 pump to
the fore-vacuum pump. A hose or vacuum approved pipe can be used.
If a rigid pipe is used, any vibration generated by the mechanical
pump must be eliminated through the use of bellows.
The Turbo V1001 pump is characterized by its high compression ratio also for oil
NOTE
vapors. When using a mechanical oil-sealed pump, it is advisable to in-stall a
suitable trap between the turbopump and the fore-vacuum pump in order to
prevent oil back-streaming.
Connection C – Electrical
Figure 56
300/312 TV 1001 Navigator User Manual / 87-900-945-01 (I)