Description - ESAB Multimaster 260 Manual De Instrucciones

SECTION 1

DESCRIPTION

I. SAFETY
Before this MMI Panel Kit put into operation, the safety section at the front of this
manual should be read completely. This will help avoid possible injury due to
misuse or improper installation.
The definitions relating to the:
safety notations are described at the end of the Safety Section in the front of this
manual — read them and their specific text references carefully.
1.1 DESCRIPTION
The MultiMaster 260 Pulse option is designed to provide simple to use, high
quality, synergic pulsed Mig welding. Synergic pulsed Mig welding means that
pulse parameters (pulse height, pulse width, background current and pulse
frequency) are automatically adjusted by the MultiMaster Pulse Pendant as you
change wire feed speed.
The Multimaster 260 Pulse option provides a PULSE ARC TRIM that allows the
operator to fine tune the pulse arc length. The operator can change to standard
welding by simply moving the PULSE /STANDARD switch to the STANDARD
position. The Multimaster 260 can then be used for non-pulsed Mig (GMAW), Tig
(GTAW) or stick electrode welding (SMAW).
PROCESS SELECTION
WIRE SPEED RANGE
SWITCH
&
WIRE DIAMETER
"NO PROGRAM"
SELECTOR
INDICATOR
WIRE MATERIAL
SELECTOR
ARC LENGTH
TRIM
Figure 1 - MultiMaster 260 PULSE Option
9