Step 9 Attach Power Cord - HP LaserJet 8150 Guía De Instalación Inicial

Step 9 Attach Power Cord

1
2
3
READY
20 Printer Setup
1 Locate the power switch on the front
of the printer. Make sure the printer
is turned off.
2 Connect the power cord to the
printer and a grounded power strip
or an AC outlet.
3 Turn the printer on. After the printer
warms up, the READY message
should appear on the control panel
display and the Ready light should
remain on. If the READY message
does not appear, see the problem
solving chapter in the online user
guide.
EN