Tabla De Contenido; Technical Specifications - Lackmond BEAST5 Manual De Instrucciones

TECHNICAL SPECIFICATIONS....................................2
GENERAL POWER TOOL SAFETY WARNINGS.........3
Safety Symbols.................................................3
Work Area Safety..............................................3
Electrical Safety................................................3
Personal Safety.................................................3
Power Tool Use and Care.................................3
Service...............................................................4
KICK BACK....................................................................5
SYMBOL DEFINITIONS.................................................5
CALIFORNIA PROPOSITION 65...................................6
SAW FEATURES............................................................6
UNPACKING..................................................................6
Shipping Contents............................................7
ASSEMBLY.....................................................................7
Attach the Blade Fence....................................7
Power supply
Motor capacity
Rated speed
Diamond cutting wheel size
Wheel thickness
Wheel peripheral gap
Wheel peripheral gap rank angle
Maximum depth of cut at 90º
Maximum depth of cut at 45º
Bevel
NOTICE: The manual cover illustrates the current production model. All other illustrations contained in the manual
are representative only and may not be exact depictions of the actual labeling or accessories included. They are
intended for illustrative purposes only.
TABLE OF CONTENTS

TECHNICAL SPECIFICATIONS

120V, 60Hz
12A
13,500 /min
5" Dia. X 5/8" or 20mm (Bore)
1.2 mm
max. 0.45 mm between segments
0 º
31.75mm
23.81mm
0º and 45º
SAVE THESE INSTRUCTIONS.
Refer to them often and use them to instruct others.
If tool is loaned to someone, also loan them these instructions.
Install the Saw Blade.......................................8
Connect the Water Hose.................................8
OPERATION...................................................................9
Turning the Saw On and Off.............................9
Using the Trigger Switch Lock.........................9
Re-setting the Short-Circuit Safety Button...10
Changing the Saw Blade................................10
MAKING CUTS............................................................11
Bevel Cut.........................................................11
Adjusting Blade Height...................................11
MAINTENANCE...........................................................11
Squaring the Blade.........................................12
TROUBLESHOOTING YOUR SAW.............................13
3-YEAR LIMITED WARRANTY....................................13
REPLACEMENT PARTS..............................................13
2
2