Operating Instructions - Walter Bio-Circle Maxi 55D600 Manual Del Usuario

OPERATING INSTRUCTIONS

The Bio-Circle™ Parts Cleaning System is designed for the
biodegradable removal of oil and grease from ferrous and non-ferrous
parts and other washable
Bio-Circle TM Maxi 55D600
1. Place parts to be cleaned into sink (item G page 5). Maximum load
capacity is 250 kg/551 lbs. Do not plug drain to fill cleaning sink. Use
optional Parts Washing Basket (item 55-B 004 on page 17) to contain
small parts.
2. Position 3-way Control Valve (Item B page 5) toward desired direction of
solution flow. Solution can flow through both the flexible faucet (item A page
5) and the flow-through brush
handle is positioned mid-way between the two.
Note: Any parts susceptible to oxidation should not be left in the sink
after cleaning.
surfaces.
(Item C page 5) Simultaneously when the
8