Enter the Bluetooth Pairing (ri-champion
Congratulations! You have completed all settings!
NOTE
• These parameters can ONLY be changed in the setting mode.
• If the meter is idle for 3 minutes during the setting mode, it will turn off auto-
matically.
USER NUMBER SELECTION
This system stores blood pressure measurements for up to four users. Each user's
test results are stored separately under each user number.
®
NOTE
This step is recommended when the user needs
to pair this meter to a Bluetooth receiver for the
first time, or when user needs to pair this meter
to another new Bluetooth receiver.
If you wish to enter the pairing mode, with
"PAr OFF" shows on the meter, press
and the meter will display "PAr On" to enable
Bluetooth pairing mode.
1. Press
to select the desired user number.
to confirm. The monitor will repeat
2. Press
the selected user number and then turn off
automatically.
8
smartPRO+ only)
once